Samsung DW Diagnostic Mode
Okay guys, today we're gonna go ahead and take a swamp storm dishwasher by Samsung, and we're gonna put it into a diagnostic mode. So what we're gonna first do is we're gonna turn on the power button, and from there we're gonna come over and then we're gonna cycle and delay. Start through two 17 hours
and. Then we're gonna push the start button. We're gonna hold the start button until it either flashes as or one, which means it's gonna go try the first cycle to make sure that the line is going to be good,
and then we'll start into the first start. Now it's gonna check to see, make sure that the drain is working properly before it starts into diagnostic mode.
From there. It will kick over. Once it determines that all the water's out and the drain is working properly,
we will kick over to the normal timed mode and then it will start going through the cycles to make sure nothing's wrong. Now if there is something wrong, it will immediately pull up codes when you put it in the that section before it even goes into the drain. Thank you guys. That's an easy way to put your Samsung dishwasher into diagnostic mode and make sure it runs all the way through.
Everything is good on your dishwasher. Thank you very much. I hope you guys, this is very informative for you and this will help you guys when you're out there in the field.